Filter
Top Products
Index
VX4101A MultiPaq Instrument User Manual
Index–5
For Digital Output, 1–11
For the Digital Multimeter, 1–11
For the Digital to Analog Converter, 1–11
For the SurePath Modules, 1–11
For the VX4101A Multipaq Instrument, 1–10
Highlights of, 1–10
Self-Test, Sequence, 1–25
Self-test, and Digital Input, 3–138, 3–287
SENSe commands
for Counter, 3–102
for Digital Multimeter (DMM), 3–235
implied abort and, 3–102
Sequence
Definition of, 2–47
Maximum number of segments in, 2–47
Soft Front Panels (SFPs)
about, 1–13, 1–17
and operational check, 1–26
Frameworks used with, 1–13
Illustrations of, 1–27
Installation, 1–17
Software, 1–17
SOURce Commands
and TXCO option, 3–109
for VX4101A Multipaq Instrument, 3–16
SOURce commands, for Counter, 3–109
Specifications, A–1
Status, 4–1
Status bits, 4–1
And status registers, 4–1
for Counter, 3–111
for DMM, 3–137, 3–155, 3–178, 3–244
for SurePath modules, 3–286
types of, 4–3
STATus commands
and coincidence bit, 3–110
for Counter, 3–110
for Relay Drivers, 3–257
for SurePath, 3–286
STATus queries
for Digital Input, 3–137, 3–155
for Digital Multimeter (DMM), 3–243
for Digital to Analog Converter (DAC), 3–178
Status registers, 4–1
Architecture, 4–1
SurePath
Accuracy of scan time, 3–275
INITiate commands, 3–261
INSTrument commands, 3–262
ROUTe commands, 3–264
Status commands, 3–286
TRIGger commands, 3–288
SurePath Modules, 1–5
Using, 2–57
VX4330, 2–57
SurePath modules
SCPI commands for, 3–259
Specifications, A–26
Switches
Location on chassis, 1–7
Logical Address Switches, 1–15
SYSFAIL* Operation, 1–25
SYSTem Commands, For VX4101A Multipaq
Instrument, 3–18
T
TEST Commands, for Digital to Analog Converter
(DAC), 3–113, 3–179
TEST commands
for Digital Input, 3–138, 3–287
for Digital Multimeter (DMM), 3–245
for Digital Output, 3–156, 3–233
Threshold, 3–65
Time Interval Measurements, with the Counter, 2–28
Time Interval with Delay, Using the Counter for, 2–30
Totalize, 3–99
TRACe Commands, for Digital to Analog Converter
(DAC), 3–180
TRACe commands, for Digital Output, 3–157
Traces, Reading from the Digital to Analog Converter
(DAC), 2–51
TRIGger Commands, For VX4101A Multipaq
Instrument, 3–26
TRIGger commands
for Digital Multimeter (DMM), 3–246
for Digital Output, 3–163
for Digital to Analog Converter (DAC), 3–188
for SurePath, 3–288
Trigger Commands, Overview, 2–9
Trigger Sources
for Counter, 2–10
for Digital Input, 2–11
for Digital Output, 2–11
for Digital to Analog Converter, 2–11
for the Digital Multimeter, 2–11
For VX4101A, 2–9
Triggering
and other instruments, 1–2
and the Digital Input, 2–33
Architecture, 2–11
Digital to Analog Converter trigger modes, 2–48
Trigger Sources, 2–9
Types of sources, 2–11
Troubleshooting, H–1