Filter
Top Products
SCPI Commands for the Digital Output
3–156
VX4101A MultiPaq Instrument User Manual
Bit FunctionDefinition
6 Arming Not used
7 Correcting Not used
8 Testing (User 1) Set when the instrument is performing a self-test. Cleared
when the self-test is complete
9 Aborting (User 2) Set when the instrument is in the process of aborting an
operation. Cleared when the abort is complete
10 User 3 Not used
11 User 4 Not used
12 User 5 Reserved
13 Instrument Summary Not used
14 Program Running Not used
15 Reserved Always 0
Command Response
init:cont on
status:operation:condition? 8
init:cont off disables trigger
stat:oper:cond? 0
TEST Subsystem
The TEST subsystem handles the self test operations of the instrument. The
Digital Output self test tests the Digital Output memory and the Read/Write
hardware control registers. The query return pass/ fail information. In a failed
situation, additional failure information can be obtained with the SYStem:ER-
Ror? query.
N/A
TEST:ALL?
N/A
N/A
Examples
Command Syntax
Query Syntax
*RST Value
Limits