Filter
Top Products
VX4101A MultiPaq Instrument User Manual
3–115
SCPI Commands for the Digital Input
This section contains the SCPI commands for the Digital Input. You can use the
commands to calibrate the instrument, prepare it for operation, or to trigger a
measurement.
Command Summary
The following is a listing of the available command subsystems and syntax:
CALibration:VALue <cal value>
Commands
CONFigure[:SCALar]
:DIGLobal
[:NORMal] <voltage_threshold>
:INVerted <voltage_threshold>
:DIPort
[:NORMal] <voltage_threshold>,<numeric_port_list>
:INVerted <voltage_threshold>,<numeric_port_list>
:DIBit
[:NORMal] <voltage_threshold>,<channel_bit_list>
:INVerted <voltage_threshold>,<channel_bit_list>
CONFigure[:ARRay]
:DIGLobal
[:NORMal] <repetitions>,<voltage_threshold>
:INVerted <repetitions>,<voltage_threshold>
:DIPort
[:NORMal]
<repetitions>,<voltage_threshold>,numeric_port_list>
:INVerted
<repetitions>,<voltage_threshold>,numeric_port_list>
CALibration Subsystem
CONFigure Subsystem