Filter
Top Products
SCPI Commands for the Digital Output
3–158
VX4101A MultiPaq Instrument User Manual
TRACe:RPERiod?
TRACe:SRATe?
Parameter Value
TRACe:INDice? 0,0
<number_of_points> 1
<repeat_frequency> 48000
<repeat_period> 0
<sample_rate> 48000
Parameter Value
<indice> 1-4096
<index> 1-4096
TRACe:INDice? 1 v segment length v 4096
1 v sample index v 4096
<number_of_points> 1 - 4096
<repeat_frequency> 0.0625 - 48000.0 and greater than:
<sample_rate> × <number_of_points>
<repeat_period> 2.0833e–5 – 16.0 and less than:
<number_of_points>/<sample_rate>
<sample_rate> 3.622 - 48000
N/A
TRACe:CLEar
Clears the memory buffer of all previous data and sets all bits to #hFFFFFFFF.
This setting causes the Digital Output to send the discrete output bits High.
If the Digital Output is currently sending data, this command forces an implied
abort, halting instrument operation. The memory buffer is initialized to its
default state of #hFFFFFFFF.
The CLEAr command does not alter the points register.
TRACe|DATA[:DATA] <indices>{,<ascii_hex_data>}
TRACe|DATA[:DATA>] <index>{,ascii_hex_data|indefinite_binary_data>}
Fills the output memory buffer with data_values from starting memory location
memory_index.
*RST Value
Limits
Related Commands
Command Description