Filter
Top Products
SCPI Commands for the Digital Output
VX4101A MultiPaq Instrument User Manual
3–151
Parameter Value
<control> 0
Parameter Value
<control> 0|1|OFF|ON
NOTE: 0=OFF, 1=ON
ABORt
INITiate:CONTinuous <control>
Initiates its current trigger sequence. After the instrument has completed the
current trigger sequence, it re-enters the initiated state. It will continue this cycle
until an abort, reset, or INIT:CONT OFF is received. See instrument documenta-
tion for details on instrument state after an initiate.
This command applies to all trigger sources.
INITiate[:IMMediate]
Initiates its current trigger sequence. After the instrument has completed the
current trigger sequence, it enters the idle state.
NOTE. This command applies only to an IMMediate TRIGger source .This
command returns an error for all other trigger sources. Either instrument will
accept triggers and generate data until the instrument receives one of the
following commands:
ABORt
INSTrument:ABORt
An implied abort
INITiate:CONTinuous OFF.
Consult the summaries for each of these commands for more information.
Command Response
INITiate:CONTinuous? 0=OFF=continuous initiate not enabled
1=ON=continuous initiate enabled
*RST Value
Limits
Related Commands
Command Description
Query Response