Filter
Top Products
SCPI Commands for the Digital to Analog Converter
3–172
VX4101A MultiPaq Instrument User Manual
Parameter Value
<channel> 1-8
<DVM reading> Offset 0
Gain 8
N/A
CALibrate[<channel>]:OUTput <voltage>
Sets the DAC output for the selected channel at the specified nominal voltage.
Enter a different <channel> to calibrate output for a different channel.
CALibrate[<channel>]:VALue <channel>,<DVM reading>
Sets the DAC for the selected channel at the most recent voltage reading from
the digital voltmeter. Use this command to refine the voltage setting for the
channel to an increasingly accurate tolerance.
For adjusting offset, you will repeat this command a total of six times.
For adjusting gain, you will repeat this command a total of eight times.
CALibrate[<channel>]:SAVE
Saves the best values found in the offset and gain adjustment. This command
loads the values in EEPROM.
FORMat Subsystem
The FORMat subsystem specifies the format of command and response data.
FORMat[:DATA] <format>
FORMat[:DATA]?
Parameter Value
<format> ASCII
Parameter Value
<format> ASCII|BINary
Limits
Related Commands
Command Description
Command Syntax
Query Syntax
*RST Value
Limits