Filter
Top Products
IEEE-488.2 Common Commands
3–300
VX4101A MultiPaq Instrument User Manual
Table 3–19:
Digital to Analog Converter (DAC) Settings
Characteristic Description
Data Format ASCII
Trace Voltages 0.0
Trace Buffer Points 1
Repeat Frequency OFF
Repeat Period OFF
Sample Rate 15000 Hz
Time Delay 0 seconds (pass-through)
Event Delay 0 triggers (pass-through)
Polarity INVerted
Mode SEQuence, 1
Trigger Source IMMEDIATE
Output Trigger Source SEQ
Table 3–20: SurePath Settings
Characteristic Description
Trigger Source Immediate
Scan Rate 16e–3 seconds
Default Module Names M1,M2,M3,...,Mn
Open/Close Dwell Time 0 seconds
Power Fail Action Open
VX4320 All sections closed to first relay
VX4330 All sections disjoined, set to 4-wire MUX
mode, all relays opened
VX4350 All relays opened
VX4380 All relays opened
N/A
INSTrument:RESet
This command sets all instruments to known states independent of past use. All
instruments are deselected by this command. The Error/Event Queue, Event
Status Registers, and Event Enable Registers are not affected by this command.
Limits
Related Commands
Command Description