Filter
Top Products
Creating a Song on the MOTIF ES
127
Owner’s Manual
Quick Guide — Advanced Course
Using the Undo/Redo functions
If you’re not satisfied with the results of a just-executed Job, or you want to hear the difference of the sound before and
after using a Job, you can use the convenient Undo and Redo functions. After changing the data with a particular Job,
repeat steps #1 -4 as desired.
1 Press the [SONG] button to return to the Song Play mode, then press the [F] button to hear the Song as it was
changed by the Job.
This lets you check the results of the Job.
2 After stopping the song, press the [JOB] button followed by the [F1] UNDO button to call up the Undo display.
Press the [ENTER] button to execute Undo.
The Song data is restored to its previous state.
3 Press the [SONG] button to return to the Song Play mode, then press the [FF
FF
] (Play) button to play the song.
This lets you check the sound before actually making changes to it with the Job.
4 After stopping the song, press the [JOB] button followed by the [F1] UNDO button to call up the Undo display.
Press the [ENTER] button to execute the Redo.
This lets you “redo” the Job, restoring the Song to the changes you made before using Undo in step #2 above.
n Undo/Redo is applied to the most recent operation (Job, Edit, Record, etc.).
n The Undo/Redo Job is available also in the Pattern Job mode.
Editing Mixing parameters to complete a Song (in the Mixing mode/Mixing Edit mode)
In this final step (other than saving your precious work, which we’ll cover next), you can mix down your tracks with the Song
Mixing function – adjusting the volume balance and pan setting of all the parts and tweaking the effect levels.
n The explanations here also apply to the Pattern mode.
Select the menu you wish to edit by pressing the [F1] - [F4] buttons, then edit the parameters in each display.
You can use the Song Mixing mode for Sample Mixing as well. For information on the available parameters, see page 233.
If you wish to edit more detailed Mixing parameters, enter the Song Mixing Edit mode.
1
Press the [SONG] button to enter the Song Play mode, then select a Song for which Mixing edits have been made.
2
Enter the Song Mixing mode by pressing the [MIXING] button (the lamp lights).
TIP
Indicates the operation to be affected by Undo. Changes to “Redo.”
[ENTER]
button
Indicates the operation to be affected by Redo. Changes to “Undo.”
[ENTER]
button
If you alter any parameters, the [E] indicator will appear in the top left of the display.
Press the [F6] button to switch between the display for
Parts 01-16 (for the internal tone generator), 17-32 (for
the Multi-Part Plug-in Board PLG100-XG), and PLG1-3
(for the Single Part Plug-in Board).
Press the [F5] VCE ED button to enter the Mixing
Voice Edit mode (page 105).