Filter
Top Products
Appendix
Display Messages
277
Owner’s Manual
Display Messages
LCD Indication Explanation
Are you sure ? [YES]/[NO] Confirms whether you want to execute a specified operation or not. Press [INC/YES] or [DEC/NO] as required.
Arp memory full The internal memory for Arpeggio data is full, preventing storing the recorded sequence data as an Arpeggio.
Arpeggio type stored The current Arpeggio type has been stored to one of the [SF1] - [SF5] buttons.
Bad disk or card. The SmartMedia or USB storage device is unusable. Format the SmartMedia or USB storage device and try again.
Bulk protected. Bulk data was received when RcvBulk was set to “protect.” (See page 264.)
Can’t find associated files. The related voice file cannot be found when loading an AKAI S1000/S3000 format file.
Can’t undo OK? [YES]/[NO]
When certain Song/Pattern Jobs are executed, internal memory becomes too full for use of the Undo operation. Press
[INC/YES] if this is OK, or [DEC/NO] to abort the operation. Try again after erasing unwanted Songs, Patterns, or User
phrases.
Choose user phrase.
You have attempted to record a Pattern track to which a preset phrase is assigned. If you wish to use a preset phrase as
raw material for Pattern recording, copy it to a User phrase before recording.
Completed. The specified load, save, format, or other Job has been completed.
Copy protected. You have attempted to export or save a copy-protected digital audio source.
Device number is off. Bulk data cannot be transmitted/received since the device number is off.
Device number mismatch. Bulk data cannot be transmitted/received since the device numbers don’t match.
Digital in unlocked. Digital input signal of the AIEB2 is unlocked (not properly received or recorded).
Disk or card full.
The SmartMedia or USB storage device is full and no more data can be saved. Use a new SmartMedia or USB storage
device, or make space by erasing unwanted data from the SmartMedia or USB storage device.
Disk or card not ready. A SmartMedia or USB storage device is not properly inserted in or connected to the MOTIF ES.
Disk or card read/write error. An error occurred while reading or writing to/from a SmartMedia or USB storage device.
Disk or card write protected.
The SmartMedia or USB storage device is write protected, or you have attempted to write to a read-only medium such as
CD-ROM.
Effect plug-in is not in slot 1.
The Effect Plug-in board does not work because it has not been installed to slot 1. The Effect Plug-in board should be
installed to slot 1.
Executing... A format operation or Job is being executed. Please wait.
File already exists. A file having the same name as the one you are about to save already exists.
File not found. The file of the specified type cannot be found on the SmartMedia/USB storage device
Folder is too deep. Directories below this level cannot be accessed.
Illegal check box.
No check boxes have been checked in a Sequencer track Job which requires a check box selection. Check the
appropriate check box.
Illegal file The file specified for loading is unusable by the MOTIF ES or cannot be loaded in the current mode.
Illegal file name. The specified file name is invalid. Try entering a different name.
Illegal input. An invalid input or value has been specified. Check the input method or value.
Illegal measure. An invalid measure number has been specified in the Song/Pattern mode. Select the measure again.
Illegal phrase number. An invalid phrase number has been specified in the Pattern mode. Select the phrase again.
Illegal sample data. The sample file specified for loading is unusable by the MOTIF ES.
Illegal track number. An invalid track number has been specified in the Song/Pattern mode. Select the track again.
Incompatible USB device A USB device which cannot be used with the MOTIF ES has been connected to the USB TO DEVICE connector.
Meter mismatch
In the Pattern Job mode, the meter (time signature) of the destination Pattern is different from the meter of the source
Pattern.
MIDI buffer full. Failed to process the MIDI data because too much data was received at one time.
MIDI checksum error. An error occurred when receiving bulk data.
MIDI data error. An error occurred when receiving MIDI data.
Mixing stored In the Song/Pattern mode, the Mixing settings have been loaded from the file.
Mixing Voice full The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the maximum capacity.
Multi plug-in is not in slot 3.
The Multi-Part Plug-in board does not work because it has not been installed to slot 3. The Multi-Part Plug-in board
should be installed to slot 3.
No data.
When a Song/Pattern Job is executed, the selected track or range contains no data. Select an appropriate track or
range. In addition, this message appears when a Job related to a Mixing Voice cannot be executed because the
specified Mixing Voice is not available.
No DIMM Memory Installed. An appropriate pair of expansion DIMMs is not properly installed, or the pair is not properly matched (page 289).
No F7 (End of Exc.)
Exclusive data has been entered or changed without the necessary “End of Exclusive” byte (F7). Make sure F7 is included.