Yamaha ES6 Recording Equipment User Manual


 
(2)-8
2/2
Before connecting the instrument to other electronic components,
turn off the power for all components. Before turning the power on
or off for all components, set all volume levels to minimum. Also,
be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
When cleaning the instrument, use a soft, dry cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemical-impregnated
wiping cloths.
Do not insert a finger or hand in any gaps on the key cover or
instrument.
Never insert or drop paper, metallic, or other objects into the
gaps on the panel or keyboard. If this happens, turn off the power
immediately and unplug the power cord from the AC outlet. Then
have the instrument inspected by qualified Yamaha service
personnel.
Do not place vinyl, plastic or rubber objects on the instrument,
since this might discolor the panel or keyboard.
Do not rest your weight on, or place heavy objects on the
instrument, and do not use excessive force on the buttons,
switches or connectors.
Do not operate the instrument for a long period of time at a high
or uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in the
ears, consult a physician.
Saving and backing up your data
DRAM data (see page 186) is lost when you turn off the power to
the instrument. Save the data to a SmartMedia/USB storage
device.
Never attempt to turn off the power while data is being written to
Flash ROM (while an “Executing...” or “Please keep power on”
message is shown). Turning the power off in this state results in
loss of all user data and may cause the system to freeze (due to
corruption of data in the Flash ROM). This means that this
synthesizer may not be able to start up properly, even when
turning the power on next time.
Backing up the SmartMedia/external media
•To protect against data loss through media damage, we
recommend that you save your important data onto two
SmartMedia/external media.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost
or destroyed.
Always turn the power off when the instrument is not in use.
Connections
Maintenance
Handling caution
Saving data