Filter
Top Products
Reference Pattern Mode
Pattern Job mode
245
Owner’s Manual
02: Copy Event
Same as in the Song Job mode. See page 229.
03: Erase Event
Same as in the Song Job mode. See page 229.
n Unlike in the Song Job mode, “Tempo,” “Scene Memory,” or “Track Mute” cannot be selected as Event Types.
04: Extract Event
Same as in the Song Job mode. See page 230.
05: Create Continuous Data
Same as in the Song Job mode. See page 230.
n Unlike in the Song Job mode, “Tempo” cannot be selected as an Event Type.
06: Thin Out
Same as in the Song Job mode. See page 230.
07: Modify Control Data
Same as in the Song Job mode. See page 230.
n Unlike in the Song Job mode, “Tempo” cannot be selected as an Event Type.
08: Beat Stretch
Same as in the Song Job mode. See page 231.
[F4] PHRASE (Phrase Job)
01: Copy Phrase
This Job copies a selected phrase to the designated
destination phrase.
After specifying the source Pattern and phrase, the
destination Pattern and phrase, and setting the
checkbox of Copy Sample, press the [ENTER] button to
execute this Job.
When the Copy Sample box is checkmarked, Sample
Voices used by the source phrase are copied to the
destination Pattern as Sample Voices, and are assigned
to the destination phrase. This is available only when
the Sample Voice is used in the source phrase.
n When there is no memory available in the destination Pattern for Sample Voice data, an error message will appear on the
display and the Sample Voice data will not be copied. If this occurs, use Sample Job 02 “Delete” to delete any unused Sample
Voices, then try again.
Any previous data in the copy destination will be overwritten.
Undo/Redo (page 244) cannot be used to undo/redo a Sample Voice copy operation.
02: Exchange Phrase
This Job exchanges or “swaps” the contents of two specified phrases (“A” and “B”).
n If this Job is applied to phrases which use Sample Voices, the Sample Voices will not be exchanged.
03: Mix Phrase
This Job mixes all data from two selected user phrases (“A” and
“B”), and places the result in phrase B.
n Keep in mind that applying this Job to phrases with Sample Voices
does not mix the Sample Voices.
04: Append Phrase
This Job appends one phrase (A) to the end of another (B) to
create one longer phrase (B).
n If this Job is applied to phrases which use Sample Voices, the
Sample Voices will not be appended.
05: Split Phrase
This Job splits a selected phrase (A) into two separate phrases (A
and B).
The data before the split point is stored to the original phrase A
and the data after the split point is moved and stored to another
phrase B. You can also set the Meter of the phrase B after the Split
Phrase Job.
n When either Pattern or Phrase is set to “off,” the split Phrase B data
is erased.
n If this Job is applied to phrases which use Sample Voices, the
Sample Voices will not be split.
The Job overwrites any data already existing in destination phrase B.
Selects the Pattern and phrase to be copied.
(Preset phrase also can be selected.)
Specify the destination Pattern and phrase.
CAUTION
CAUTION
Phrase A
Phrase B
Phrase B
Mix Phrase
Phrase A
Phrase B
Append Phrase
Phrase A
Phrase B
Phase A is divided at the Split Point
Phrase A
CAUTION