Filter
Top Products
Quick Guide — Advanced Course
Editing a Voice
85
Owner’s Manual
Plug-in Voice Edit
The Plug-in Voices (available when installing optional Plug-in Boards to the instrument) can be edited in basically the same way
as in Normal Voice Edit (page 79). Unlike with Normal voices, the Plug-in voices only have one Element for editing. In addition,
some of the other parameters may not be available. Refer to page 205 in the Reference section.
Storing/Saving the created Voice
Two steps are necessary in order to store (save) your voice – storing the edited voice to internal memory and saving the stored
voices to a SmartMedia/USB storage device.
Keep in mind that edited Voice data is stored to internal User memory (Flash ROM) and is stored even when turning the power
off. As such it is not necessary to save the data to SmartMedia card or another device; however, you may want to save it to
another media for backup or organizational purposes, using the Save operation. For more information, see page 86.
Storing the edited Voice as a User Voice
to internal memory
Make sure to execute the Store operation before selecting
another Voice.
Select a User Bank (“USR1” or “USR2” when storing a Normal
Voice, “UDR” when storing a Drum Voice, “P1-U” ~ “P3-U”
when storing a Plug-in Voice) and the desired Voice number
by using the data dial, [INC/YES] and [DEC/NO] button.
When you execute the Store operation, the settings for the destination
memory will be overwritten. Important data should always be backed up to
a separate SmartMedia/USB storage device.
The display prompts you for confirmation.
To cancel the Store operation, press the [DEC/NO] button.
User Plug-in Voice 064
User Plug-in Voice 001
User Plug-in Voice 002
User Plug-in Voice 003
User Plug-in Voice 064
User Plug-in Voice 001
User Plug-in Voice 002
User Plug-in Voice 003
Voice Edit
STORE
User Normal Voice 128
User Normal Voice 001 User Drum Voice 001
User Drum Voice 002
User Drum Voice 003
User Drum Voice 32
User Drum Voice Bank
Internal memory (Flash ROM)
User Normal Voice 002
User Normal Voice 003
User Normal Voice Bank 1
User Normal Voice 128
SmartMedia
USB storage
device
User Plug-in Voice 001
User Plug-in Voice 002
User Plug-in Voice 003
User Plug-in Voice 064
User Plug-in Voice Bank 1
File extension: W7A
File extension: W7V
File extension: W7E
SAVE
All the User
Voice data in
internal
memory can
be saved as
a single file.
The W7E file can be loaded to the
Voice Editor, computer software.
Storing
edited Voices
individually
[VOICE] → [STORE]
1
After editing the Voice, press the [STORE] button
to enter the Voice Store mode.
2
Select the destination Voice memory.
Select a User Bank.
Select a Voice number.
3
Press the [ENTER] button.
CAUTION
EXIT ENTER
EXECUTE
DEC/NO INC/YES