Filter
Top Products
Reference Voice Mode
Voice Edit mode Normal Voice Edit Element Edit
199
Owner’s Manual
FCenterKey
This indicates that the central note for Cutoff Sensitivity above is C3. At C3, the tone remains unchanged. For other
notes played, the Cutoff Frequency varies according to the particular note and the Cutoff Sensitivity setting. Keep in
mind that this is for display purposes only; the value cannot be changed.
Settings: C -2 ~ G8
EGTimeSens
(EG Time Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the Filter EG times of the
selected Element. The basic speed of change for the FEG is at the note specified in the Center Key (next
parameter). A positive setting will cause slower changes for lower notes and faster changes for higher notes.
A negative setting will have the opposite effect.
Settings: -64 ~ 0 ~ +63
FCenterKey
Determines the central note or pitch for the Key Follow effect on Filter EG. Depending on the EG Time Sensitivity
parameter above, the further away from the Center Key the keys are played, the more the time of the Filter EG
deviates from the normal. When the Center Key note is played, the FEG behaves according to its actual settings.
The Filter change characteristics for other notes will vary in proportion to the EG Time settings.
Settings: C -2 ~ G8
n You can also set the Center Key directly from the keyboard, by holding down the [INFORMATION] button and pressing the
desired key. Refer to the Basic Operation section, page 53.
[SF5] SCALE (Filter Scaling)
Filter Scaling controls the filter cutoff frequency according to the positions of the notes on the keyboard. You can
divide the entire keyboard by four break points, and assign different offset values of Cutoff Frequency to them
respectively. Refer to the setting example on page 211.
Settings: BREAK POINT 1 ~ 4: C-2 ~ G8
OFFSET 1 ~ 4: 128 ~ 0 ~ +127
n You can also set the Break Point directly from the Keyboard, by holding down the [INFORMATION] button and pressing the
desired key. Refer to the Basic Operation section, page 53.
[F4] AMP (Amplitude)
[SF1] LVL/PAN (Level/Pan)
This display not only lets you make basic Level and Pan settings for each individual Element, it also gives you some
detailed and unusual parameters for affecting Pan position.
Level Determines the output level for the selected Element.
Settings: 0 ~ 127
Pan Determines the stereo Pan position for the selected Element. This will also be used as the basic Pan position for the
Alternate, Random and Scale settings.
Settings: L63 (Left) ~ C (Center) ~ R63 (Right)
AlternatePan Determines the amount by which the sound of the selected Element is panned alternately left and right for each note
you press. The Pan setting (above) is used as the basic Pan position.
Settings: L64 ~ 0 ~ R63
RandomPan Determines the amount by which the sound of the selected Element is panned randomly left and right for each note
you press. The Pan setting is used as the Center Pan position.
Settings: 0 ~ 127
ScalingPan Determines the degree to which the notes (specifically, their position or octave range) affect the Pan position, left
and right, of the selected Element. At note C3, the main Pan setting (above) is used for the basic Pan position.
Settings: -64 ~ 0 ~ +63
[SF2] VEL SENS
(Velocity Sensitivity)
From this display you can determine how the Amplitude (volume) EG responds to velocity.
EG Time,
Segment
Determines the velocity sensitivity of the AEG’s Time parameters.
Select the Segment first, then set its Time parameter. Positive Time settings will play back the specified Segment
faster in proportion to the played velocity and negative values will play it back slower.
Settings: EG Time -64 ~0 ~+63
Settings: Segment: atk, atk+dcy, dcy, atk+rls, all
atk (attack) ............................EG Time Value affects Attack time.
atk+dcy (attack + decay)...... EG Time Value affects Attack/Decay1 time.
dcy (decay)........................... EG Time Value affects Decay time.
atk+rls (attack + release)...... EG Time Value affects Attack/Release time.
all ..........................................EG Time Value affects all AEG Time parameters.
Center key
Center key
Higher
range
Lower
range
Large
Small
–
+
Amount of cutoff
frequency change
Positive value
Higher rangeLower range
Slower speed
Faster speed
+63
+30
-40
Negative value
When Cutoff Sensitivity is set to 100
Cutoff Sensitivity and Center Key
EG Time Sensitivity and Center Key