Yamaha ES6 Recording Equipment User Manual


 
Information Displays
275
Owner’s Manual
Appendix
Information Displays
The convenient Information displays let you see at-a-glance some of the more important settings relevant to each mode. Select
the desired mode, then press the [INFORMATION] button to call up the Information display for that mode. To exit from the
display, press the button again (or any other panel button).
Voice mode
Bank
Indicates the Bank/Number (page 60) of the currently
selected Voice.
EL 1234
Indicates the currently selected Voice, on/off status of the four
Elements and mono/poly (page 79) status.
Porta (Portamento)
Indicates the Portamento switch on/off status of the currently
selected Voice.
PB (Pitch Bend)
Indicates the Upper/Lower setting of the Pitch Bend range.
InsA (Insertion A), InsB (Insertion B), Rev (Reverb),
Cho (Chorus)
Indicates the currently selected effect type for each effect
block (page 179).
Performance mode
Bank
Indicates the Bank/Number (page 67) of the currently
selected Performance.
1 (Plug-in board 1), 2 (Plug-in board 2), 3 (Plug-in board 3)
Indicates the installation status of the respective Plug-in board.
The Plug-in board name is displayed at the right of the
corresponding slot number. When PolyExpand (page 265) is set to
on in the Utility mode, “P” is indicated at the left of the slot number.
Ins (Insertion), InsPLG (Plug-in Insertion)
Indicates the Part number to which the Insertion effect is
applied and the Part number to which the Plug-in Insertion
effect is applied (when the PLG100-VH is installed).
Rev (Reverb), Cho (Chorus)
Indicates the currently selected effect type for each effect
block (page 179).
Song mode
Song Play mode
Indicates the amount of currently unused (available) memory
(DRAM) for song recording.
Song Mixing mode
PlugInfo/Port (Plug-in board installation status)
Indicates the Plug-in board name and its MIDI port number
page 265) at the right of the slot number. When PolyExpand
(page 265) is set to on in the Utility mode, “P” is indicated at
the left of the slot number.
Ins (Insertion), InsPLG (Plug-in Insertion)
Indicates the Part number to which the Insertion effect is
applied and the Part number to which the Plug-in Insertion
effect is applied (when the PLG100-VH is installed).
Rev (Reverb), Cho (Chorus)
Indicates the currently selected effect type for each effect
block (page 180).
Appendix