Filter
Top Products
Reference Song Mode
Song Mixing Store mode
237
Owner’s Manual
This function lets you store your edited Song Mixing program to User memory (DRAM).
For details, refer to page 131 in the Quick Guide section.
Data type of Destination Song
(current selected song)
Set the Part of the destination Song.
Destination part (Type): Part 1~16, PartP1~P3 (Plug-in Part 1~3), PartA1~A5 (Audio Part 1~5), Arp, Effect (Reverb, Chorus)
n If you choose Arp (Arpeggio) or Effect, the Arpeggio data or Effect settings for the Voice assigned to the source Part will be
copied.
[F4] BULK (Bulk Dump)
This function lets you send all your edited parameter settings for the currently selected Song Mixing program to a computer or another MIDI instrument for data
archiving.
n In order to execute Bulk Dump, you’ll need to set the correct MIDI Device Number. For details, see page 264.
[F5] PF COPY (Performance Copy)
This convenient operation lets you copy certain settings of the four Parts in a performance to the Song Mixing program currently being edited. This would come in
handy when a certain performance has settings that you want to use in your Song Mixing program. Use this Job to simply copy the settings you need.
The MIDI receive channel settings are set to match the basic channel settings (page 263). When the basic channel is set to “omni,” the receive channel here is set
to 1. To select a group of parameters for copying, checkmark the appropriate box in the display.
[F6] TEMPLATE
This convenient function lets you store your mixing settings as a template — allowing
you to easily set up similar mixes by calling up the proper template, then tweaking it
as needed. Templates are saved as part of the System data (page 186) in the Utility
mode and not as data for each song.
After inputting a Template number and name, press the [SF5] PUT button to save the
current setting to the Template. After selecting the desired Template number, press the
[SF4] GET button to call it up.
n Since the Mixing templates are stored as System data (page 186) in Flash ROM, the data is
maintained even when the power is turned off. The Mixing template stored here can be called
up in the Pattern mode as a Pattern Mixing program.
Song Mixing Store mode
[SONG] → Song selection → [STORE]
Te mplate
Number
Template
Name
Pressing the [SF4] button lets you
call up the template selected at left.
Press the [SF5] button lets you save the current
setting to the template selected at left.