Filter
Top Products
11 Monitor and Cue
100 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section
• MONITOR SELECT
Selects the monitor source.
• MONITOR DELAY
Delays the monitor signal.
• CUE OUT DELAY
Delays the cue signal.
• METER
Switches the signal that is shown in the meter section
or in the display.
• DIM (Dimmer)
Attenuates the monitor/cue signal by a fixed amount.
• OUT ATT. (Output attenuator)
Attenuates/boosts the monitor/cue signal.
• ON (On/off)
Switches the monitor signal on/off.
• PHONES LEVEL
Adjusts the output level of the top panel and front
panel PHONES jacks.
• MONITOR LEVEL
Adjusts the monitor level.
• CUE OUT LEVEL
Adjusts the output level of the cue signal.
Using the Monitor function
A [2TR IN A1] key
B [2TR IN A2] key
These keys select the input signals of 2TR IN ANA-
LOG jacks 1/2 as the monitor source.
C [2TR IN D1] key
D [2TR IN D2] key
E [2TR IN D3] key
These keys select the input signals of 2TR IN DIGITAL
jacks 1–3 as the monitor source.
F [STEREO A] key
G [STEREO B] key
These keys select the output signals of STEREO A/B
channels as the monitor source. By simultaneously
pressing the [STEREO A] key and [STEREO B] key
you can select the LCR channels as the monitor source.
H [DEFINE] key
This key selects the output signal of the pre-selected
MIX channel 1–24 or MATRIX channel 1–8 as the
monitor source. This monitor source selected by this
key can be specified in the MONITOR screen (MON/
CUE function).
Hint
The currently selected source is shown by the lit/dark state of
keys
1
–
8
.
I MONITOR [LEVEL] knob
This knob adjusts the output level of the signal being
output from the MONITOR OUT L/R/C jacks.
J MONITOR [ON] key
This key turns the monitor output on/off.
K MONITOR [PHONES] knob
This analog volume adjusts the output level of the
PHONES jacks.
L [MONO] key
If this key is on, the monitor output L/R channels will
be mixed and output as a monaural signal. The signal
will return to stereo when you turn this key off.
Items in the MONITOR section
1
3
4
5
9
J L
2
6
7
8
K