Filter
Top Products
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section 119
15
Graphic EQ and Parametric
Expanding the GEQ modules
The GEQ modules provided by the PM5D can be expanded to a maximum of 20 modules by re-purposing the eight internal
effects.
1
In the DISPLAY ACCESS section, repeatedly
press the [GEQ] key to access the GEQ ASSIGN
screen.
In this screen, you can view the overall settings and
input/output levels for the GEQ modules, specify the
signal routing, and turn the module on/off.
2
In the DSP CONFIGURATION box located in
the lower right of the screen, click the left/
right / buttons to change the number of
internal effects and GEQ modules that will be
assigned.
If twelve GEQ modules are used, there will be eight
internal effects. If twenty GEQ modules are used, no
internal effects will be available.
Basic graphic EQ operations
There are two ways to control a graphic EQ; using the virtual faders and buttons within the display, or using the DCA faders of
the panel.
Here’s how to control the desired graphic EQ by using the
faders and buttons shown in the GEQ PARAM screen
(GEQ function).
1
In the DISPLAY ACCESS section, repeatedly
press the [GEQ] key to access the GEQ PARAM
screen.
GEQ ASSIGN
DSP CONFIGURATION box
Controlling the graphic EQ from the
display
MODULE box Spectrum analyzer
GEQ PARAM
Faders LIMIT area
GEQ/PEQ button