Filter
Top Products
INPUT VIEW function
314 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
This screen shows the on/off status, level, and cue monitor
status of the input channels and DCA groups.
Except for the fact that this screen is for input channels,
DCA groups, and STEREO A/B channels, this is the same
as the OUTPUT VIEW function FADER VIEW screen.
Refer to p.273.
In this screen you can copy the desired parameter(s) from
the selected input channel into a memory buffer, and paste
or move them to the same type of channel (you may select
more than one paste-destination).
A JOB SELECT
Here you can select either Copy or Move as the
operation.
• COPY
The copy-source channel will remain; its parameters
will be copied to another channel.
• MOVE
The parameters will be moved to another channel.
Note
When you execute the channel move operation, the channels
between the selected channel and the move-destination chan-
nel will also move forward or backward.
FADER VIEW screen
FADER VIEW
CH JOB screen
CH JOB
CH JOB
1