Filter
Top Products
INPUT ø/EQ function
288 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
Here you can adjust the amount of attenuation/gain
immediately following AD conversion, and reverse the
phase.
A GANG
When you turn this button on, attenuation/gain set-
tings will be linked for adjacent odd-numbered/even-
numbered channels (or the L/R sides of an STIN/
FXRTN channel).
If the settings are different when you turned the but-
ton on, they will maintain their relative difference
while linked.
B ø (Phase)
This button inverts the phase of each channel’s signal
following AD conversion.
C Attenuation/gain
For each channel, you can adjust the amount of attenu-
ation/gain immediately following AD conversion over
a range of –96 dB to +24 dB. This is linked with the
ATT knob of the EQ PARAM screen. The current value
is displayed in the box located below the knob.
D Channel
This is the number and name of the channel. If two
adjacent odd-numbered/even-numbered channels are
paired (or if a STIN channel or FXRTN channel is dis-
played), a heart symbol is displayed between the two
channels.
ø/ATT 1-48 (Phase/Attenuation
1-48) screen
ø/ATT STIN/FXRTN (Phase/Attenua-
tion STIN/FXRTN) screen
ø /ATT 1-48
ø /ATT STIN/FXRTN
1
2
3
4