Filter
Top Products
MATRIX/ST function
264 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
C MIX TO MATRIX ON/OFF
This button is an on/off switch for the signal sent from
each MIX channel or STEREO A/B channel to the
MATRIX buses. If this button is off, no signal will be
sent from that channel to the MATRIX buses.
D PRE FADER/POST FADER/POST ON
These buttons select the position from which the sig-
nal is sent from the MIX channel or STEREO A/B
channel to the MATRIX buses, from the following
choices.
This parameter applies to the signal sent from the cor-
responding channel to all MATRIX buses.
E MIX TO STEREO ON/OFF
This button is an on/off switch for the signal sent from
each MIX channel to the STEREO bus. If this button is
off, no signal will be sent from that channel to the STE-
REO bus.
F PRE/POST (Pre-on/Post-on)
This button selects the position from which the signal
is sent from the MIX channel to the STEREO bus, from
the following choices.
G PAN (MIX→STEREO pan)
This knob specifies the panning of the signal sent from
the MIX channel to the STEREO bus. If a MIX chan-
nel is selected in the SELECTED CHANNEL section,
the STEREO [PAN] encoder is linked with this knob.
Hint
If the source is a STEREO A/B channel, parameters
5
–
7
are not displayed.
H MIX channel, STEREO A/B channel
This area indicates the MIX channel or STEREO A/B
channel from which the signal is being sent. Paired
MIX channels are indicated by a heart symbol dis-
played between them. You can click this symbol to
enable/disable pairing.
This screen lists the signals sent from the MIX channels to
the MATRIX buses. You can also edit the settings from
within this screen.
A MIX to MTRX/MTRX from MIX
Select one of the following two types of screen display.
❏ When the MIX to MTRX button is on
You can view the status of the signals sent from a spe-
cific MIX channel or STEREO A/B channel to all
MATRIX buses.
PRE FADER Immediately before the fader
POST FADER Immediately after the fader
POST ON
Immediately after the MIX [ON] key / STE-
REO [ON] key
PRE
Immediately before the MIX [ON] key
(immediately after the fader)
POST Immediately after the MIX [ON] key
4
8
3
7
5
6
MIX to MATRIX VIEW screen
MIX to MATRIX VIEW
1 2