Filter
Top Products
10 Scene memory
92 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section
5
In the SCENE MEMORY section of the console,
press one of the SCENE MEMORY [1]–[8] keys.
The LED of the corresponding key will light, and the
scene assigned to that key will be recalled.
Using the Selective Recall function
“Selective Recall” is a function that lets you restrict the parameters or channels that will be updated when you recall a specific
scene, or, conversely, specify for each scene parameters or channels that will be excluded from recall operations.
Hint
As a function similar to Selective Recall, there is also a “Recall
Safe” function that lets you select channels and parameters to
be excluded from recall operations (
➥
p.94). However it dif-
fers from Selective Recall in that Recall Safe settings apply to
all scenes.
1
In the DISPLAY ACCESS section, press the
[SCENE] key several times to access the SELEC-
TIVE RECALL screen shown below.
2
In the SELECTION MODE area in the upper
middle of the screen, choose one of the fol-
lowing two selection modes to specify how the
SELECTIVE RECALL screen will operate.
• SAFE PARAMETER mode
Specify channels/parameters that will be excluded from
Recall operations.
• RECALL PARAMETER mode
Specify channels/parameters that will be affected by
Recall operations.
When you click a button to change the mode, a confir-
mation window will appear. Immediately after you
switch modes, all channels/parameters will be subject
to recall.
3
Use the buttons in the screen to select the
parameters/channels that will be subject to
recall (or excluded from recall).
The SELECTIVE RECALL screen is divided into three
areas. From the left, these areas let you make settings
for input channels, output channels, and other param-
eters. The buttons in the screen correspond to
parameters and channels as follows.
❏ Input channels / Output channels
A SAFE ON/OFF
RECALL ON/OFF
The functions and names of these buttons will depend
on the currently-chosen SELECTION MODE.
• SAFE PARAMETER mode
The buttons will function as SAFE ON/OFF buttons to
select the channels that will be excluded from Recall.
• RECALL PARAMETER mode
The buttons will function as RECALL ON/OFF but-
tons to select the channels that will be subject to Recall.
B Parameter matrix grid
Here you can select the parameters that will be
excluded from (or subject to) Recall. If the ALL button
is on, all parameters will be excluded from (or subject
to) Recall.
C SET ALL
Turns on all buttons for all input channels/output
channels or for the corresponding parameter.
D CLEAR ALL
Turns off all buttons for all input channels/output
channels or for the corresponding parameter.
SELECTIVE RECALL SELECTION MODE area
3
4
12