Filter
Top Products
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section 217
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
Here you can assign the desired input channels / output
channels to the eight faders in the DCA section of the
panel. Here you can also assign the machine, INPUT chan-
nel layer, and ST IN/FX RTN layer that will be switched in
tandem with the FADER MODE.
A MACHINE ID
This assigns a machine ID number (#1–#3) that will be
the target of panel operations. If you select “STAY” the
machine will not change.
B INPUT
This assigns the layer that will be operated by the
INPUT channel strip. You can select 1–24 or 25–48. If
you select “STAY” the layer will not change.
C 1–8 (DCA faders 1–8)
Here you can assign the channel that will be operated
by each fader. You can select CH 1–48, STIN1L–
STIN4R, FXRTN1L–FXRTN4R, MIX1–24,
MATRIX1–8, DCA1–8, MONITOR LEVEL, or CUE
LEVEL of each machine. If you select “STAY” the fad-
ers will not change. If you select “----,” the faders will
be disabled.
D ST IN/FX RTN
This assigns the layer that will be operated by the ST
IN/FX RTN channel strip. You can select either ST IN
or FX RTN of each machine. If you select “STAY” the
machine will not change.
E FADER MODE
Indicates the currently selected fader mode (layer A–F,
DCA). You can also click the buttons to switch the
fader mode directly. The machine, INPUT channel
strip, DCA faders, and ST IN/FX RTN channel strip
will change.
F Faders 1–8
The parameter assigned to each fader of the DCA fader
section is shown here. This will depend on the cur-
rently selected fader mode. You can also operate the
fader directly by dragging it upward or downward.
G STEREO A/STEREO B
This selects the function that will be operated by the
STEREO faders and STEREO [ON] keys of the STE-
REO A/B channel strip. You can select ST A/B,
MONITOR, or CUE.
Hint
Settings
1
–
4
and
7
will not change until you press the
ENTER key to confirm.
FADER ASSIGN screen
FADER ASSIGN
1 2 4 53
6
7