Filter
Top Products
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section 379
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
Error Messages
These are messages displayed as popup windows in the center of the screen. After noting the content of the message, click the
OK button in the screen to close the popup window.
Message Meaning
Cannot Store! Failed to store a scene memory or library.
Cannot Recall! Failed to recall a scene memory or library.
Memory Card Full! You attempted to save a file that was larger than the available capacity of the memory card.
File Not Found! The file/directory does not exist on the memory card.
Couldn’t Read File. Failed to read the file from the memory card.
Couldn’t Write File. Failed to write the file to the memory card.
Couldn’t Delete File. Failed to delete the memory card file.
Couldn’t Open File. Failed to open the file from the memory card.
Couldn’t Close File. Failed to close the file on the memory card.
Unsupported File Format! The file you attempted to load from the memory card is of an unsupported format.
No Files to Upload! Internal memory does not contain files to upload.
Low Battery! The backup battery voltage is low.
Power Supply has Malfunctioned!
A problem has occurred with the PW800W power supply connected to the PM5D. Please contact your
Yamaha dealer.
Total Slot Power Capability Exceeded! The I/O cards installed in the slots exceed the rated power capacity.
Internal Power Supply is Cut Off!
(DSP5D only) Power has stopped being supplied from the internal power supply. Alternatively, some
type of problem has occurred. If a problem has occurred, please contact your Yamaha dealer.
External Power Supply is Cut Off!
(DSP5D only) Power has stopped being supplied from the PW800W power supply connected to the
DSP5D. Alternatively, some type of problem has occurred. If a problem has occurred, please contact
your Yamaha dealer.
Illegal MAC Address! Cannot Use
Ethernet.
(DSP5D only) Because the MAC address setting was damaged for some reason, communication via the
NETWORK connector (RJ-45 connector) is not possible. Please contact your Yamaha dealer.
Power Supply Fan has Malfunctioned!
(DSP5D only) The cooling fan for the internal power supply has stopped. Please contact your Yamaha
dealer.
Right Fan has Malfunctioned! (DSP5D only) The cooling fan on the right side has malfunctioned. Please contact your Yamaha dealer.
Left Fan has Malfunctioned! (DSP5D only) The cooling fan on the left side has malfunctioned. Please contact your Yamaha dealer.