Filter
Top Products
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section 187
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
This screen lets you copy parameter settings of any desired
channel or parameter in the current scene, and paste them
into one or more scenes in scene memory.
A PASTE MODE
Select the type of copy-source parameter from the fol-
lowing choices. You cannot select more than one type
simultaneously.
INPUT . . . . . .Input channel parameters
OUTPUT . . . . Output channel parameters
DCA, GEQ, EFFECT . . . .DCA level or mute on/off
status, GEQ settings, inter-
nal effect settings
B CURRENT SCENE
Here you can select the channels and parameters that
will be copied from the currently selected scene. The
contents shown in this area will depend on the paste
mode (
1) you choose.
• If Paste Mode= INPUT
Select input channels in the left area, and select param-
eters in the right area. You can select the following
parameters.
• If Paste Mode= OUTPUT
Select output channels in the left area, and select
parameters in the right area. You can select the follow-
ing parameters.
Note
• If Paste Mode= INPUT, and the parameter being pasted is
NAME, the name library linked to the selected scene will be
searched automatically and pasted.
• Be aware that if other scenes link to this library, the paste
operation will overwrite the library, meaning that other
scenes may be affected.
GLOBAL PASTE screen
GLOBAL PASTE
1
2
ALL
All parameters except for HA, PATCH, and
NAME
ATT Attenuator
EQ EQ function settings
GATE GATE function settings
COMP COMP function settings
DELAY DELAY function settings
FADER Fader level
ON CH [ON] key on/off status
PAN/BAL Pan/balance settings
INSERT Insert on/off status and insert point
SEND
*1
*1. If the SEND button is on, use the MIX buttons (1–24) to
select the applicable MIX bus. If the MIX bus is paired,
SEND PAN is included in PAN/BAL if FOLLOW PAN
“VARI” is on, or included in SEND if it is off.
Send level to the desired MIX bus(es)
DCA Associated DCA group
MUTE Associated mute group
LCR LCR screen settings
HA
Settings for the head amp assigned to the
corresponding input channel
PATCH
Settings for the input patch assigned to the
corresponding input channel
NAME
Name assigned to the corresponding input
channel
EQ EQ function settings
COMP COMP function settings
DELAY DELAY function settings
FADER Fader level
ON CH [ON] key on/off status
BAL Balance settings
INSERT Insert on/off status and insert point
TO MTRX
*1
*1. If the TO MTRX button is on, use the MATRIX buttons
(1–8) to select the applicable MATRIX bus.
Send level to the desired MATRIX bus(es)
DCA Associated DCA group
MUTE Associated mute group
LCR LCR screen settings
WITHOUT
MIX SEND/
WITH MIX
SEND
Selects whether the send level sent from
input channels to the selected MIX bus will
be included (WITH...) or will not be included
(WITHOUT...) in the pasted data.