Filter
Top Products
INPUT DCA/GROUP function
298 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
Here you can specify the input channels that will be
assigned to EQ link groups 1–8. EQ parameters are linked
for channels belonging to the same group.
A EQ link group
These are the EQ link group numbers. The number
corresponding to the grid where the cursor is located is
highlighted.
B Grid
This grid lets you assign input channels (horizontal
rows) to EQ link groups (vertical columns). Currently-
patched grids are indicated by a symbol. Move the
cursor to the desired grid and press the [ENTER] key
(or click) to set/disable the assignment.
Hint
Input channels and output channels use separate EQ link
groups. Input channels use groups A–H, and output channels
use groups 1–8.
C SET BY CUE (Assign by [CUE] key)
This specifies whether the [CUE] key will be used to
make/cancel EQ link group assignments. While the EQ
link group SET BY CUE button is on, pressing the
[CUE] key of a channel that can be assigned to the cor-
responding group will assign the channel to the group.
(Press the [CUE] key once again to cancel the
assignment.)
Hint
The SET BY CUE button can be turned on for only one EQ
link group. This is automatically turned off when you change
screens or turn off the power.
D CLEAR
This button clears all input channels assigned to that
EQ link group.
EQ LINK ASSIGN screen
EQ LINK ASSIGN
1 2
43