Filter
Top Products
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section 287
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
These screens list the EQ settings for the input channels.
Here you can also copy EQ settings between input
channels.
Note
In some screens that include channel numbers as part of the
screen name, changing the Pair Mode to Vertical Pairing in
the MIXER SETUP screen will change the name of the
screen.
Example: EQ 1-24 screen → EQ 1,25- screen
A EQ graph
This mini-graph shows the approximate EQ response
for each input channel.
When you click the graph at which the cursor is cur-
rently located, the EQ PARAM screen for that channel
will appear.
In this screen you can drag and drop the mini-graph
from the desired channel to copy its EQ settings.
(When you drag and drop the mini-graph, a window
will appear, asking you to confirm the copy operation.)
You can also copy EQ settings between the three
screens EQ 1-24, EQ 25-48, and EQ STIN/FXRTN.
First drag the mini-graph over the EQ 1-24, EQ 25-48,
or EQ STIN/FXRTN tabs in the screen (the screen will
switch). Then drag and drop the mini-graph onto the
desired channel, and a window will appear, asking you
to confirm the copy operation.
B EQ ON/OFF
Turns the EQ on/off for that channel. This is linked for
two paired channels.
C Channel
This is the number of the channel you are editing. Two
paired channels are indicated by a heart symbol dis-
played between them.
D Level meter
This meter indicates the peak level after EQ. If the sig-
nal clips, the OVER segment will light.
EQ 1-24 screen
EQ 25-48 switch
EQ STIN/FXRTN screen
EQ 1-24
EQ STIN/FXRTN
4 1 2
3