Filter
Top Products
UTILITY function
212 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
If the SCENE MEMORY, HA, INPUT PATCH, or
OUTPUT PATCH button is on, you can use the box at
the right to specify the starting number and ending
number of the scenes or library items that will be saved.
Hint
If the specified range of numbers includes empty scenes or
library items, the correspondingly-numbered scenes or library
items will be empty when that data is loaded.
C TOTAL SIZE
Indicates the file size of the currently selected item(s)
(common to all modes).
❏ ADVANCED mode
In this mode you can select either scene memory or a
library, specify a starting number and ending number, and
save the specified range of data on a card. If desired, you
can also specify that the starting number be shifted for-
ward or backward when the data is saved. If ADVANCED
is selected, the left side of the screen will show the follow-
ing items.
D CATEGORY
Indicates the category of data that is selected for sav-
ing; scene memories or library data. Click the /
buttons at left and right to change the category.
E SOURCE (save-source numbers)
This area shows the starting and ending number (and
the corresponding scene names or library titles) of the
scene memories or library items that will be saved on
the card. Click the / buttons at the left and right of
each box to change the number.
F DESTINATION (save-destination number)
This area shows the starting and ending number (and
the corresponding scene names or library titles) with
which the data will be saved on the card. If you want to
save the data to the card with a different range of num-
bers, click the / buttons at the left and right of the
starting number box. (The value in the ending number
box will change automatically as the starting number is
edited.)
❏ CSV EXPORT mode
In this mode you can select items such as scene memory or
library titles, or channel names, and write them to a card as
a separate CSV format file for each item. If CSV EXPORT
is selected, the left side of the screen will show the items
listed in the following table.
Note
If a DSP5D (machine #2 or #3) is selected as the target of
control, CSV files can’t be written. If you need to write a CSV
file, please use DSP5D Editor.
Starting number Ending number
4
5
6
ADVANCED button
PM
5
D
011
012
013
014
015
AAA
BBB
CCC
DDD
EEE
001
002
003
004
005
006
AAA
BBB
CCC
DDD
EEE
FFF
➠
Memory card
Starting
number
Ending
number
8
9
J
7
CSV EXPORT button