Filter
Top Products
CALL FORWARDING
Call Forwarding – No Answer
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 80
NDA-24271, Issue 1.0
5. Replace the handset or press the Speaker key.
• To cancel Call Forwarding – No Answer
1. Lift handset or press Speaker key and receive dial tone.
2. Press the Call Forwarding – No Answer feature access key and receive special dial tone. Press the * key,
the associated LED goes out and service set tone is received. The LCD displays CANCEL.
From a Single Line Telephone
• To set Call Forwarding – No Answer
1. Lift handset and receive dial tone.
2. Dial Call Forwarding – No Answer feature access code and receive feature dial tone.
3. Dial the desired target station number and receive service set tone.
• To set Call Forwarding – No Answer – Outside
1. Lift the handset and receive Dial Tone.
2. Dial Call Forwarding – No Answer feature access code and receive feature dial tone.
3. Dial the trunk access code and the desired telephone number.
4. Wait until service set tone is received.
5. Replace the handset.
• To cancel Call Forwarding – No Answer
1. Lift handset and receive dial tone.
2. Dial specific Call Forwarding – No Answer cancellation code and receive service set tone.
Service Conditions
1. An unlimited number of stations can set Call Forwarding – No Answer at one time.
2. Stations are allowed/disallowed this feature by Class Of Service in system programming.
3. Call Forwarding – No Answer can be provided on a system and an individual basis.
4. Call Forwarding on a system basis allows Direct Inward Dial (DID) calls or Tie Line calls which encounter
a no-answer condition to be forwarded to a predetermined location (Attendant Console, another station, or
voice mail equipment).
5. Individual Call Forwarding – No Answer settings take precedence over system Call Forwarding – No An-
swer settings.
6. Call Forwarding – No Answer timing, flexible in system programming, is as follows:
• For direct incoming calls (DID, DIT, Tie) – 4 to 120 seconds (Default: 32-36 seconds).
• For internal calls and transferred incoming calls – 4 to 120 seconds (Default: 32-36 seconds).
7. More than one call forward can occur in the progress of a call. See Multiple Call Forwarding – All Calls,
Multiple Call Forwarding – Busy Line and Multiple Call Forwarding – No Answer.
8. Call Forwarding – Busy Line can be set simultaneously with this feature to result in Call Forwarding Busy/
No Answer. Call Forwarding Busy Line and Call Forwarding – No Answer can be set to the same or differ-
ent extensions.
9. When Call Forwarding – No Answer – Outside is set, the system can be programmed to allow or deny the
setting of the Call Forward with only a trunk access code. This can be set on a system-wide basis.