Filter
Top Products
AUTOMATIC NUMBER IDENTIFICATION (ANI)
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 59
AUTOMATIC NUMBER IDENTIFICATION (ANI)
General Description
This feature receives the calling subscriber's number automatically sent from T1 network using MF signaling
and displays the calling number on the LCD of a Multiline Terminal and an Attendant Console.
Station Application
All Multiline Terminals with LCD and Attendant Consoles.
Operating Procedure
No manual operation is required.
Service Conditions
1. Up to 16 digits of the calling subscriber's number for ANI can be displayed on the LCD of the Multiline
Terminal or the Attendant Console.
2. Up to 16 digits of the calling subscriber's number can be recorded in the Station Message Detail Recording
(SMDR) by system programming.
3. Up to 24 digits of the calling subscriber's number can be sent out to the OAI computer by system program-
ming.
4. ANI information can not be transmitted to a tie line or a C.O. line through tandem connection.
5. The 4RSTB card is required for the MF receiver of ANI information.
6. Two signaling formats are supported for ANI: ANI format and Feature Group D (most common). Selection
of format is system-wide (one format per system).
7. Feature group D format and ANI format are described below:
8. If using DNIS on the Attendant Console, some of the characters of the displayed name will be cut off de-
pending on the number of digits of ANI.
Signal Pattern Called Number ANI
FGD Format MF signal MF signal
ANI Format DP signal MF signal