Filter
Top Products
STATION MESSAGE DETAIL RECORDING (SMDR)
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 296
NDA-24271, Issue 1.0
When a call is completed, the record is sent to the output device and is removed from memory. If the amount
of calls exceed the SMDR memory, those overflow calls will not be recorded.
7. The built-in SMDR can not be provided when AP00 is mounted.
8. The built-in SMDR does not provide a record of tandem calls.
9. Account Codes, Forced Account Codes, Authorization Codes and DISA Codes on Tandem connections
(SMDR with AP00 only) are reported in the applicable call record.
10. SMDR with AP00 provides a record of incoming Tie Line tandem calls where another trunk is dial accessed.
11. For details of SMDR format, data stream, memory buffer, etc., refer to the Installation Procedure Manual/
Feature Programming Manual.
12. Up to 16 digits of the calling subscriber’s number for Automatic Number Identification (ANI) and CPN (IS-
DN) can be recorded in the SMDR by system programming.
13. In case of built-in SMDR, if the station number exceeds six digits, only the last six digits will be sent.