Filter
Top Products
ATTENDANT CONSOLE
Attendant Programming
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 31
To program system speed dialing
1. Press the SPD key.
The SPD key LED (red) comes on.
2. Dial the speed dial block # (5 digits).
The selected block number is displayed as follows along with the currently registered trunk access code and
telephone number.
3. If there is no change skip to Step 4, otherwise dial the new trunk access code to register.
4. Press the Answer key.
5. If there is no change skip to Step 6, otherwise dial the new telephone number.
6. Press the Answer key.
The new access code and the telephone number are set up.
7. Press the CNCL key.
To program another speed dial block number, return to Step 2.
8. Press the CNCL key.
The system goes back to the status assumed after the password was set.
To set up the system clock
1. Press the CLOCK key.
The CLOCK key LED (red) comes on.
2. Dial the new date and time (12 digits).
Dial the date and time in the following order: MT DY DW HH MM SS.
MT: Month (01-12)
DY: Day
DW: Day of week (00-06: SUN-SAT)
HH: Hour (00-23)
MM: Minute (00-59)
SS: Second (00-59)
3. Press the Answer key.
The new date and time are set up.
4. Press the CNCL key.
The system goes back to the status assumed after the password was entered.
Tenant #
Buffer #
12345. . . . . .56
SPD
00012 9–
CLOCK
012301010203