Filter
Top Products
CALLER ID CLASS
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 105
Service Conditions
1. Up to 14 digits of the calling subscriber’s name or number can be displayed on the LCD of a Multiline Ter-
minal or an Attendant Console.
2. Up to 16 digits of the calling subscriber’s number can be recorded on the SMDR.
3. Up to 24 digits of the calling subscriber’s number can be sent to the OAI computer.
4. The 4RSTC card and the 4COTG/8COTQ card are required for receiving the Caller ID signals.
5. In case of receiving the subscriber’s name while another name is being assigned by system programming,
it can be set which one has priority.
6. The kind of the ringing tone can be assigned to each calling subscriber’s number respectively.
7. The destination station in the Day Mode/Night Mode can be specified for each calling subscriber’s number.
8. The priority for queuing (when the destination station belongs to an UCD group and all the stations are busy)
can be set by each calling subscriber’s number.
9. It can be specified whether Call Waiting will be set or not by each calling subscriber’s number.
10. Table 0 in CMDC YY = 00-63 is reserved for incoming numbers not programmed in the system.
11. When the system is in Mode “A” or “B,” caller ID follows night termination of caller ID Development Data
Assignment.