NEC NEAX 2000 Recording Equipment User Manual


 
DIRECT INWARD TERMINATION (DIT)
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 145
DIRECT INWARD TERMINATION (DIT)
General Description
This feature automatically routes incoming network exchange calls directly to a preselected station without At-
tendant assistance. The call can then be processed by the called party. Three-party Conference, Call Transfer,
etc., are handled in the same manner as any normal trunk call.
Station Application
All stations.
Operating Procedure
No manual operation is required.
Service Conditions
1. Bothway trunks can be used for Direct Inward Termination, but incoming only trunks are recommended.
This minimizes DIT calls meeting busy conditions.
2. If there is no answer at a station, the calling party will continuously receive ringback tone. Call Fowarding
- No Answer will occur if set or the calling party will be transferred to the Attendant or Trunk Answer any
Station by system programming if enabled.
3. Once a call is answered, it can be processed by the called station in the same way as any normal trunk call.
4. If the DIT is assigned to a pilot number of a Station Hunting group or Automatic/Uniform Call Distribution
(ACD/UCD) group, the incoming call will follow the hunt group station assignment. If the station is Call
Forwarded, the incoming call is connected to the Call Forward target station according to the types of Call
Forwarding set and the condition of the DIT station.
5. This feature is normally utilized where direct-in service is required on a limited basis. The number of sta-
tions thus serviced is limited to the number of trunks available for Direct Inward Termination.
6. Multiple trunks can be assigned to Direct Inward Terminate to an extension, but a trunk cannot be assigned
to Direct Inward Terminate to multiple extensions.
7. When the Direct Inward Termination station is busy, the call can be preprogrammed to either go to the At-
tendant, Trunk Answer any Station, or Camp-On. During night mode, the call can be pre-programmed to
Camp-On or go directly to Trunk Answer any Station.