Filter
Top Products
RESIDENT SYSTEM PROGRAM
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 272
NDA-24271, Issue 1.0
02 for 4 Wire E&M Tie Lines
03 for Direct Inward Dial lines
• Incoming call indication:
Provided at trunk line appearance LED.
g. Trunk Route Data:
Following data is assigned on a trunk route basis.
• Type of trunk:
RT00
→
Direct Distance Dialing
RT01, RT02
→
E&M Tie Lines (2W/4W)
RT03
→
Direct Inward Dialing
• Type of address signaling for all trunk routes is DTMF for incoming and outgoing calls.
Tie Lines are assigned for wink - start operation.
h. System Speed Dialing memory block data:
100 Memory blocks are allocated to tenant 00.
i. Multiline Terminal line key data:
The following data is assigned according to the type of the terminal.
• 8-button terminal:
Line key 08 - Primary extension
Line keys 01 through 07 - Trunks 000 through 006
• 16-button terminal:
Line key 16 - Primary extension
Line keys 01 through 04 - Trunks 000 through 003
j. Prime Line
For all Multiline Terminals, the primary extension is assigned as the Prime Line.
k. Memory allocation for Station Speed Dial:
• Multiline Terminals without DSS keys - 10 buffers
• Single Line Telephones - 10 buffers
Up to the maximum of 4500 buffers
l. All stations are assigned to tenant 01.
m. Numbering Plan
Numbering Plan
CM 20
Y (0 - 3) Access Code Setting Data Service Features
0 0 800 Operator Call
11 A046 Call Hold
2, 3, or 4 803 First digit of three digit station number