Filter
Top Products
NIGHT SERVICE
Night Connection - Fixed
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 236
NDA-24271, Issue 1.0
Station Application
All stations.
Operating Procedure
By dial access code
1. Go off-hook and receive dial tone.
2. Dial the DAY/NIGHT Mode Change feature access code followed by 1 for DAY mode/2 for NIGHT mode/
3 for MODE-A mode/4 for MODE-B mode.
3. Restore the handset.
By function key on a Multiline Terminal
1. Go off-hook or press the Speaker key and receive dial tone.
2. Press the assigned feature access key.
3. Dial 1 for DAY mode/2 for NIGHT mode/3 for MODE-A mode/4 for MODE-B mode.
4. Restore the handset or press the Speaker key.
Service Conditions
1. This feature is assigned in the station's Class of Service.
2. If using a function key on a Multiline Terminal, the associated lamp will be lit when the tenant changes Day
mode to another mode.
Night mode :Red lamp on
MODE-A mode:Red lamp flashing (60 int)
MODE-B mode:Red lamp flashing (120 int)
3. On a system basis, incoming trunk destination and trunk restriction class can be changed (depending upon
programming) when the tenant or system is placed in Night Service.
4. This feature is only available for the tenant without a master Attendant Console.
Night Connection - Fixed
General Description
This feature allows incoming calls normally terminated to the Attendant to reroute to a predetermined station
when the system is placed in Night Service.
Station Application
All stations, except fully restricted stations.
Operating Procedure
With an incoming call during Night Service:
1. The outside party hears ringback tone.
2. Ringing signal is sent to the night station.