Filter
Top Products
STATION HUNTING
Station Hunting - Circular
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 291
STATION HUNTING
General Description
Three Station Hunting arrangements are available. Station Hunting - Circular processes the call no matter which
station in the hunt group is called. Station Hunting - Terminal initiates a hunt only when the pilot number of a
hunt group is called. Station Hunting - Secretarial is initiated when a busy secretarial station in a Station Hunting
- Circular group or Station Hunting - Terminal group is reached.
Station Hunting - Circular
General Description
When a busy station in a hunt group is called, this feature permits the call to be processed automatically through
the hunt group in a preprogrammed order from that station's position within the hunt group.
Station Application
All stations.
Operating Procedure
No manual operation is required.
Service Conditions
1. When all stations within a Station Hunting - Circular group are busy, the calling party will receive busy tone
unless the call is rerouted by Station Hunting - Secretarial.
2. Assignment of station numbers to a Station Hunting - Circular group may be in any numerical order. The
last station in the order of hunting can be programmed, if required (Switch Back System).
3. Calls to any programmed station in a Station Hunting - Circular group will, when that station is busy, pro-
ceed through all other stations entered subsequently in the hunt group until reaching the last.
4. If a hunt group station has set Do Not Disturb, hunting will bypass that station and continue in the order of
hunting.
5. The maximum number of stations per hunt group is 60.
6. There is no limit to the number of Station Hunting - Circular groups within the system.
7. In a Station Hunting - Circular group, any number of stations can be designated as secretarial stations. When
all stations in the Station Hunting - Circular group are busy, the system will reroute a call initiated to the
secretarial station to a preassigned Station Hunting - Secretarial group. All stations within the Station Hunt-
ing - Circular group can be assigned the same station as an entry to the Station Hunting - Secretarial group.
8. Call Forwarding - All Calls has priority over Station Hunting if the dialed station has this feature set. Call
Forwarding - Busy, if set at the called station, can occur if all stations in the hunting group are busy.
9. Recalls (Call Back, Call Park, Camp-On, Call Transfer, etc.) return to the originating station and do not
hunt.
10. Each station can belong to only one hunt group.