Filter
Top Products
TRUNK - DIRECT APPEARANCES
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 311
Service Conditions
1. The Multiline Terminal with 16-line buttons has 15 available line keys which can be assigned as Trunk-
Direct Appearances. The Multiline Terminal with 8-line buttons has 7 available line keys which can be as-
signed as Trunk-Direct Appearances.
2. The following features are available:
• Outgoing call connection restriction • Code Restriction
• Conference • Delayed Ringing
• Station Message Detail Recording (SMDR) • Hold
• Call Transfer • Call Park
• Save and Repeat • Last Number Redial
• Broker's Call • Station Speed Dialing
3. When an outgoing call is placed, the following restrictions apply:
• Trunk Queuing Outgoing is not available.
• System Speed Dialing cannot be used.
• Account Codes may be entered using the function key programmed for Account Code entry, or Account
Codes can be dialed from second dial tone.
4. The LED associated with the line key will be lit red when the trunk is busy, and green when being used by
the station that selected that trunk.
5. Trunks assigned as Trunk-Direct Appearance on Multiline Terminals can also be assigned to ring at Atten-
dant Consoles and Trunk Answer any Station.
6. For further information, refer to the Flexible Line Key Assignment and Flexible Ringing Assignment fea-
tures.
7. When transferring the call of line key, it can be specified by system data programming whether a dial tone
is sent or not by pressing TAH key.
8. To set Exclusive Hold to a call of a line key by the TAH key assigned to a programmable key, press Feature
key first, then press the TAH key.