Filter
Top Products
CALL FORWARDING
Multiple Call Forwarding – Busy Line
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 84
NDA-24271, Issue 1.0
Multiple Call Forwarding – Busy Line
General Description
This feature permits a call to a busy station to be forwarded, multiple times, to a predesignated idle station.
Station Application
All stations.
Operating Procedure
The same operating procedures for Call Forwarding – All Calls apply.
Service Conditions
1. Multiple Call Forwarding – Busy Line can not be performed for data calls.
2. Multiple Call Forwarding – Busy Line can route a call up to five times when the called station sets Call For-
warding – Busy Line to a station that is busy that has set Call Forwarding – Busy Line and so on.
3. If the calling station is set as the forwarded destination of its own call in a multiple call forwarding scheme,
Call Forwarding – Busy Line at that point will not take place.
4. If the incoming call returns to one of the stations that has taken party in the process of multiple call forward-
ing, the Call Forwarding – Busy Line from that station will not be performed.
5. If all the stations are busy in a multiple call forwarding sequence, a calling internal station may then activate
Call Back, Message Reminder, Camp On, or Executive Override to the called station.
6. If the station is a Direct In Termination call, Call Forwarding – Busy Line is not activated. The calling party
may be forwarded to the Attendant Console, to Trunk Answer any Station, put in Automatic Camp-On, or
can receive ringback until the station becomes idle.
7. If the called station is set as the forwarded destination in a multiple call forwarding scheme, Call Forwarding
– Busy Line at that point will not take place.
8. If the called station is set to Call Forwarding – Busy Line to another station in a different tenant and that
station is set to Call Forwarding – Busy Line to the Attendant Console, the calling station will be connected
to the calling station's Attendant Console.
9. For Multiple Call Forwarding – Busy Line, the display of a Multiline Terminal with LCD will show the
called station number and the final forwarded station number for the calling party. For the final forwarded-
to station, the display of the Multiline Terminal with LCD will show the called number and the calling party
(station or trunk).
Multiple Call Forwarding – No Answer
General Description
This feature permits a call to an unanswered station, the ability to be forwarded multiple times to a predesignated
station that does not have Call Forwarding – No Answer set or to the Attendant Console.
Station Application
All stations.