Filter
Top Products
AUTOMATIC WAKE-UP
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 63
To set Automatic Wake-Up from the Hotel/Motel Front Desk Instrument while engaged in conversation
with the station
1. Press the WK UP key.
2. Dial the wake-up time in military format (in one minute increments).
3. Press the SET key.
4. Press the RLS key.
To cancel Automatic Wake-Up from the Hotel/ Motel Front Desk Instrument wile engaged in conversation
with station
1. Press the WK UP key.
2. Press the RESET key.
3. Press the RLS key.
To set Automatic Wake-Up from a guest room station or administrative station
1. Go off-hook and receive dial tone.
2. Dial the Wake-Up access code and receive feature dial tone.
3. Dial the desired Wake-Up time in military format (in one minute increments).
4. Receive service set tone.
5. Restore the handset.
To cancel Automatic Wake-Up from a guest room station or station or administrative station
1. Go off-hook and receive dial tone.
2. Dial the Automatic Wake-Up cancellation code.
3. Receive service set tone.
4. Restore the handset.
Service Conditions
1. Setting and canceling can be initiated from the following:
• Attendant Console
• Hotel/Motel Front Desk Instrument
• Guest Station
• Administrative Station
• Property Management System (PMS) terminal
2. A maximum of 32 stations can be set for the same Automatic Wake-Up time. When the setting exceeds 32,
the excess stations will be set to an earlier time in 5 minute intervals.
3. Wake-Up attempts, whether successful or not, can be printed out at a locally provided printer. The results
of execution of Automatic Wake-Up set and cancel are also printed.
4. The ringing signal is the same as station-to-station calls, and its time can be assigned from 4 sec. to 32 sec.
(programmable on a system basis).
5. The Automatic Wake-Up call will ring a station in Do Not Disturb.
6. When setting or canceling has been completed, service set tone is heard as confirmation.