Filter
Top Products
CALL PARK
Call Park - Tenant
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 95
8. A call can be retrieved from Call Park-System while receiving feature dial tone.
9. If a station other than the station that originally parked the call retrieves the call, Station Message Detail
Recording (SMDR) will record a transfer.
10. Parked calls receive Music On Hold, if provided.
11. When a Call Park-System recalls to an Attendant Console, no LED indication is provided. However, the call
park location will appear in the display.
12. No LED indication for the Call Park-System key on an Attendant Console is provided.
Call Park - Tenant
General Description
When a call is parked by Call Park-Tenant, the call can be retrieved from Call Park-Tenant by any station within
the tenant from which the call was originally parked.
Station Application
All stations.
Operating Procedure
To place a call into Call Park-Tenant
• From a Single Line Telephone
1. Press the FLASH key (or momentarily press the hookswitch) and receive feature dial tone.
2. Call in progress is placed on Consultation Hold.
3. Dial the Call Park-Tenant feature access code.
4. Dial the Call Park-Tenant location number (1-8) and receive service set tone. (If Call Park number is busy,
dial another location number using the Step Call feature until idle Call Park location is accessed).
5. Receive service set tone.
6. Restore the handset.
• From a Multiline Terminal
1. Press the Transfer key and receive feature dial tone.
2. Call in progress is placed on Consultation Hold.
3. Dial Call Park-Tenant feature access code.
4. Dial Call Park-Tenant location number (1-8) and receive service set tone. (If Call Park number is busy, dial
another location number using the Step Call feature until idle Call Park location is accessed).
5. Receive service set tone.
6. Restore handset.
OR
1. Press the Hold key if Call Park-Tenant feature key is provided on the Multiline Terminal.
2. Restore the handset.