Filter
Top Products
PROPRIETARY MULTILINE TERMINAL
Called Station Status Display
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 255
Called Station Status Display
General Description
This feature provides a display on the status of a called station on the LCD of the calling Multiline Terminal.
Station Application
All Multiline Terminals with LCD.
Operating Procedure
1. Lift the handset or press the Speaker key and receive extension dial tone.
2. Dial the desired station.
3. The status of the called station appears on the LCD.
Service Conditions
1. If the called station is idle, the called stations number will flash on the LCD until the call is answered. When
the call is answered, the number and the name of the called party will be displayed in the LCD. The called
party's name can be assigned in system programming.
2. If the called station is busy, the LCD will display
BUSY
and the called station's number.
3. If the called station is in Do Not Disturb, the LCD will display DND and the called station's number.
4. If a restricted station is called, the LCD will display RESTRICT and the called station's number.
5. If the called station has set Call Forwarding -All Calls/-Busy Line/-No Answer, the LCD will display CF
ALL, CF BUSY, or CF NANS respectively, the called station's number and the target station's number.
6. If the called station is in a Call Pickup group and the call is picked up by another station, the LCD will dis-
play PICK, the called station's number and the number of the station that picked up the call.
7. Refer to the Alphanumeric Display and Elapsed Call Timer features for additional information.
Calling Name and Number Display
General Description
This feature provides a display on the LCD of the Multiline Terminal receiving a call, indicating the station num-
ber or trunk number of the incoming call.
Station Application
All Multiline Terminals with LCD.
Operating Procedure
No manual operation is required.