Filter
Top Products
DIAL BY NAME
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 130
NDA-24271, Issue 1.0
DIAL BY NAME
General Description
This feature allows a Multiline Terminal user to search for a desired number by name. The number and name
are registered in the system and they are shown on Multiline Terminal LCD. The Multiline Terminal user can
search for the desired number by name using up or down soft keys. When the Multiline Terminal user finds the
desired number, the call can be originated by pressing the Line/Trunk key or going off hook.
Station Application
Multiline Terminal with LCD and Soft Key.
Operating Procedure
To search calling number by name and originate a call by Speed Dialing-System
1. From the idle state, press the SYS soft key on the Multiline Terminal.
2. To search by name, enter up to the first four characters of a name using the keypad. (Refer to Service Con-
dition #2.)
3. Press the UP or DOWN soft key to start the search.
4. The name and the number are shown on the LCD. If more than one name matches the letters entered, scroll
through the matches with the UP or DOWN soft key. If no matches are found, the first System Speed Dial
buffer will be displayed.
5. To search for a different name, repeat Step 2.
6. Manual search is performed by pressing the UP or DOWN soft key until the desired name or buffer number
is located.
7. In either case, going off hook, pressing the Speaker key, or selecting a Line/Trunk key will originate a call
to the selected number.
To search calling number by name and originate a call by Speed Dialing-Station
1. From the idle state, press the STA soft key on the Multiline Terminal.
2. To search by name, enter up to the first four characters of a name using the keypad. (Refer to Service Con-
dition #2.).
3. Press the UP or DOWN soft key to start the search.
4. The name and the number are shown on the LCD. If more than one name matches the letters entered, scroll
through the matches with the UP or DOWN soft key. If no matches are found, the first Station Speed Dial
buffer will be displayed.
5. To search for a different name, repeat Step 2.
6. Manual search is performed by pressing the UP or DOWN soft key until the desired name or buffer number
is located.
7. In either case, going off hook, pressing the Speaker key, or selecting a Line/Trunk key will originate a call.