Filter
Top Products
STACK DIAL
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 290
NDA-24271, Issue 1.0
5. When the lower line of the LCD is being used by Data Communication/OAI, Stack Dial is not available.
6. The maximum number of digits that can be memorized by Stack Dial is 32. The number of digits to be dis-
played on the LCD ranges from 1 to 16.
7. When only one number is registered by Stack Dial, blank is displayed on the lower line of the LCD when
the Redial key is pressed. If redial is attempted by pressing the # key while blank is being displayed, the
station user hears reorder tone.
8. While a number is being displayed by Stack Dial, it cannot be saved for Save and Repeat. After the call has
been redialed by Stack Dial, the number can be saved.
9. The Stack Dial feature access key (Redial) can be used for both Last Number Redial and Station Speed Di-
aling.
10. When a digit key is pressed instead of the # key, while Stack Dial is being displayed, a station speed dial
call is originated. (In this case, current clock is displayed in the lower line of the LCD.)
11. The Stack Dial stored numbers will not be saved in the event of a system reset.
12. The following is displayed on the Attendant Console:
RDL[#] -1 10:23 AM TUE 20
00238241554