Filter
Top Products
FLEXIBLE LINE KEY ASSIGNMENT
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 170
NDA-24271, Issue 1.0
FLEXIBLE LINE KEY ASSIGNMENT
General Description
Multiline Terminals can have any desired line key assignment. This feature permits assignments to be tailored
to each individual's needs. (The terminal's primary extension line appearance is the only line key which cannot
be reassigned.)
Station Application
All Multiline Terminals.
Operating Procedure
No manual operation is required.
Service Conditions
1. Each line key can be assigned as one of the following:
• Trunk Access
• Extension
• Save and Repeat
• Do Not Disturb
• Data
• Intercom
• Hotline
• Feature Access
Refer to the applicable Features and Specifications for more information on that feature.
2. Line key assignment is made in system programming using the Maintenance Administration Terminal
(MAT) or Customer Administration Terminal (CAT).
3. The Multiline Terminal with 16 buttons has 15 programmable line keys. One line key is reserved for that
station's primary extension.
4. The Multiline Terminal with 8 buttons has 7 programmable line keys. One line key is reserved for that sta-
tion's primary extension.
5. A maximum of one Do Not Disturb key and three Save and Repeat keys can be assigned per Multiline Ter-
minal.
6. Stations desiring dial tone from a specific line can press that line key before lifting the handset.
7. When Station Speed Dialing is assigned to the line key on a Series E Multiline Terminal with no DSS key
by the system data, and an extension number is assigned to the line key by the station user, a lamp of the
line key indicates the busy/idle status of the extension.