Filter
Top Products
CALLER ID DISPLAY
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 107
3. If there is no incoming/held call on the line key and there is no Camp-On call, the Multiline Terminal does
not come into CID mode even if the CID key is pressed.
4. If there are plural incoming/held calls, Camp-On calls, the following priority for displaying is applied:
a. Camp-On call information set to the call in progress on the Multiline Terminal
b. Incoming/held call information in order of the line key number (lowest to highest number)
5. When a call is transferred by Consultation Hold, the display shows the following information.
Before the transfer operation finishes; the LCD displays the information of the station which holds the call.
After the transfer operation finishes; the LCD displays the information of the held station/trunk.
6. When a call is set Executive Hold, the call information cannot be displayed on the other Multiline Terminal.
7. The information of voice call cannot be displayed.
8. When the following terminating system is assigned to the trunk, the calling party information of the call
which is terminated to the trunk access key can be displayed by the CID key.
• Trunk-Direct Appearances
• Trunk-Direct Appearance+TAS