Filter
Top Products
NIGHT SERVICE
Night Connection - Flexible
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 237
3. The night station goes off-hook and answers the call. If necessary, the answered call can be transferred to
another station or outside party.
Service Conditions
1. Night Connection station can be assigned the following types of trunks:
• Direct Distance Dialing (DDD)
• Foreign Exchange (FX)
• Wide Area Telephone Service (WATS)
• Common Control Switching Arrangement (CCSA)
• Direct Inward Dialing (DID) (available only for LDN calls)
• TIE (available only for operator calls)
2. Each night station can be assigned multiple trunks.
3. A fully restricted station cannot be assigned as a night station.
4. If the night station to which an incoming call has been terminated is busy, the system can be programmed
to provide one of the following choices on a per-trunk basis:
• Automatic Camp-On
• Trunk Answer Any Station
• Ringback tone.
5. If the night station does not answer after a predetermined time, the system can provide one of the following
options on a per-trunk basis:
• Trunk Answer Any Station
• Ringback tone.
6. The night station can be assigned to a Station Hunting Group.
7. The night station can be assigned to an Automatic/Uniform Call Distribution (UCD) group.
8. If the night station has set Call Forwarding, incoming calls terminated to that station will be forwarded to
the destination station.
9. If the night station has set Call Forwarding to the Attendant, this setting will be ignored and incoming calls
will terminate to the night station.
10. Night stations can access Call Hold, Call Transfer, and Conference provided these features are programmed
into its Class of Service.
Night Connection - Flexible
General Description
This feature provides incoming calls normally terminated to the fixed night station to be Call Forwarded to an-
other station.
Station Application
All stations, except fully restricted stations.