Filter
Top Products
PROPRIETARY MULTILINE TERMINAL
I-Hold/I-Use Indication
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 257
Service Conditions
1. The MIC LED must be lit to transmit during Handsfree operation. When the microphone is off, the outside
party cannot hear the Multiline Terminal user's conversation.
2. Clipping of voice transmission or reception may occur if the microphone is covered or the ambient noise
level in the area is too loud.
I-Hold/I-Use Indication
General Description
Multiline Terminals provide indication of which line keys have been placed on Hold, or are in use by that Mul-
tiline Terminal. The LED associated with the line key will give the appropriate indication.
Station Application
All Multiline Terminals.
Operating Procedure
No manual operation is required.
Service Conditions
1. Multiline Terminals provide a green LED lit steady at the line key currently being used by that Multiline
Terminal.
2. Multiline Terminals provide a green flashing LED at the line key placed on Hold by that Multiline Terminal.
3. The LED flash rate for calls placed on I-Hold (by that terminal) is .125 seconds on, .125 seconds off, .125
seconds on, .625 seconds off.
Microphone Control
General Description
All Multiline Terminals are equipped with a Microphone Control button with an associated LED.
Station Application
All Multiline Terminals.
Operating Procedure
When the MIC LED is off, press the Feature key followed by 1 to activate the microphone. The associated LED
will light.
Service Conditions
1. When the MIC LED is lit, Intercom voice and extension voice calls to a Multiline Terminal can be answered
using the microphone.