Filter
Top Products
PROPRIETARY MULTILINE TERMINAL
Dynamic Dial Pad
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 256
NDA-24271, Issue 1.0
Service Conditions
1. When a call terminates to a line other than the station's Prime Line, the Calling Name and Number Display
will be indicated only after the ringing line key is pressed or the call is answered. For trunk calls, the LCD
displays the trunk route name and trunk number. For internal incoming calls on the Prime Line, the LCD
displays the extension number and caller's name. For Direct Inward Termination (DIT), the LCD displays
DIT, the trunk route name and trunk number.
2. When an incoming call terminates to the Prime Line, the station number and name will be displayed when
the call begins ringing.
3. Refer to the Alphanumeric Display and Elapsed Call Timer features for additional information.
Dynamic Dial Pad
General Description
This feature allows to make an outgoing call at first hand by pressing a ten key of Multiline Terminal, without
pressing a Speaker key or going off-hook.
Station Application
All Multiline Terminals.
Operating Procedure
Dial the desired station number by pressing a ten key, without pressing a Speaker key or going off-hook.
Service Conditions
1. An extension must be set as a Prime Line.
2. This feature is not available when the prime line is busy.
Handsfree Unit
General Description
The built-in Handsfree Unit enables full Handsfree operation for both internal and external calls (No optional
Handsfree Unit is required).
Station Application
All Multiline Terminals.
Operating Procedure
1. Press the Feature key followed by 1 to turn on the microphone: MIC LED is lit.
2. Press the Speaker key and the associated LED lights.
3. Dial the desired number.
4. When the called party answers, converse Handsfree.