Filter
Top Products
PROPRIETARY MULTILINE TERMINAL
Recall Key
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 261
Service Conditions
1. One Prime Line per station is allowed. Prime Line is assigned on a per-station basis by the Maintenance
Administration Terminal (MAT) or Customer Administration Terminal (CAT).
2. Only extensions or Direct Trunk Appearances can be assigned as Prime Lines.
3. The default setting for Prime Line is the station's primary extension.
Recall Key
General Description
Each Multiline Terminal is equipped with a Recall Key that is used to generate a hookflash to access features
provided by the outside exchange, or to abandon a call while retaining the line for origination of another call.
Station Application
All Multiline Terminals.
Operating Procedure
With an outside or Tie Line call in progress using extension appearance
1. Press the Recall key.
2. Receive internal dial tone and trunk is released.
With an outside or Tie Line call in progress using direct appearance
1. Press the Recall key.
2. Key operation is not affected. The call is still in progress.
With a CENTREX call in progress, using an extension or a Trunk Direct Appearance
1. Press the Recall key.
2. Receive CENTREX feature dial tone.
With an internal call
1. Press the Recall key.
2. Receive internal dial tone.
With a Conference in progress
1. Press the Recall key. The station is removed from the Conference.
2. Receive internal dial tone.
Service Conditions
1. The default duration of the timed disconnect signal or hookflash signal is 600 msec., and is programmable
on a per-system basis.
2. The Recall key functions differently, depending on the type of line key appearance and type of outgoing
trunk.