Filter
Top Products
DIRECT STATION SELECTION/BUSY LAMP FIELD (DSS/BLF) CONSOLE
Wake Up No Answer Console
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 152
NDA-24271, Issue 1.0
Wake Up No Answer Console
General Description
This feature allows a DSS/BLF Console associated with a Multiline Terminal to be used as a Wake Up No An-
swer (WU) Console. This feature is activated by a function mode key on a DSS/BLF Console. The No Answer
status for each station is indicated by a flashing green LED associated with each button.
Station Application
All Multiline Terminals with a DSS/BLF Console.
Operating Procedure
To display and cancel Wake Up No Answer
1. Press the WU key. If stations failed to answer their wake up call, their associated LED flashes green at 30
ipm.
2. Press the Function Mode key: an LED associated with the Function Mode key will light red.
3. Press the flashing DSS key(s) to turn out the desired station's LED.
4. Press the WU key again to return to the DSS/BLF mode, if desired.
Service Conditions
1. The Wake Up No Answer Console is only used to display/cancel the No Answer status of the Automatic
Wake Up feature after the station has failed to answer. The Automatic Wake Up feature cannot be set from
the Wake Up No Answer Console.
2. If the system is initialized (reset), the Console function mode will return to DSS/BLF.
3. Refer to the DSS/BLF Console and the Automatic Wake Up Features and Specifications for more details.